When swapping a 1UZ or 3UZ into an IS chassis it is essential to use a front sump setup.
Some donor engines (LS430 especially) come with a mid sump setup and a forward facing oil filter housing which then fowls on the sway bar when installed.
To counteract this we have tested several housings and found this to be the best solution. This comes as a full kit however you will need to transfer the oil pressure switch from your original filter housing.
To aid in fitment we have also deleted the factory oil to water cooler/warmer. Included is a block drain plug to replace the original one that has a coolant port on the side.
The bolts required to install this are the same as the original so a direct replacement.
Contents of the kit are:
UZ oil filter housing and O-ring seal
Appropriate threaded adapter
Oil filter (YZZJ3)
Block drain plug
Please contact us for availability as during busy periods we may have a delay in delivery